Sponsor Vehicle Projects & Shop Tours - Vengeance builds 93 Camaro Big Tire/Tube Chassis with LSX 427 and LOTS of nitrous!!!
01-15-2009, 02:32 PM
This is one of the builds currently on our plate and I thought I would post up for all to see. Our beloved customer SlowEtz sold his Pewter WS6 with a Vengeance stroker and picked up this 93 Camaro with a Big block in it... After getting some seat time he realized he missed the LS power plant and decided instead of freshening his current big block he would sell it and install an LSX. Having proven ourselves originally on his previous car SlowETz gave us the opportunity to build this combo as well.
Here are some pics of the car prior to us getting our hands on it...
Ill be posting quite a few pics of the car in its current state over the coming days... Stay tuned.
01-15-2009, 03:15 PM
Out with the old.....
Check out the firewall... Think the owner ever smelled engine bay gases? :)
Lets fix that while we can
Before we install the new LSX lets apply some fresh paint to dress everything up.
01-19-2009, 09:27 AM
I jumped the gun on posting pics of the paint work in the engine compartment.... Here are the mock up pics of the LS ...
01-19-2009, 11:23 AM
Here are a few shots of the under carriage/suspension. This car was built almost 14 years ago, but everything seems to be holding its own quite well.
01-19-2009, 01:27 PM
LSX longblock build up!!!
Engine is 12.3:1 Final compression. Will be tuned for pump gas on the street as SlowETz does intend on cruising thru town a bit.
Engine consists of:
GM LSX Block/Callies 4" Crank/Callies 6.125 Rods/JE Custom pistons/Ring pack/ACL Coated main/rod bearings/ARP Main Stud Kit/Cometic MLS Head Gaskets/ Cloyes Timing set/Melling Hi Volume Pump/Comp Lifters/Vengeance Custom Camshaft/TrickFlow 235cc CNC Cylinder Heads (6 bolt/cylinder)/ARP 6 bolt/cylinder Head Stud Kit/Yella Terra Ultra Lite Rockers/Moroso Race Pan
01-19-2009, 03:28 PM
LSx 427 gets bolted to its new home!!!
Motor plate courtesy of Madman & Co Racing!!! Trimmed to spec at our local machine shop.
01-19-2009, 03:41 PM
Intake setup consists of:
Edelbrock Super Vic Intake- Fully ported by Total Engine AirFlow(Port Matched to customer TFS 235s)
I have to give Brian @ TEA ALOT of credit here. Take a look at the pics below. There is NO transition from intake to cylinder heads. Port work is incredible. Gasket matched as well.
Accell 4150 Throttlebody with progressive linkage
NX Plate Plumbed by Dave at Nitrous Outlet for two kits. 500/500 max HP
Snapped a pic of the plate in action with a single stage :)
01-19-2009, 04:05 PM
Engine/Trans is in. Pictures below show the addition of:
Hedman custom 1 7/8 x 2 x 3 1/2 Longtubes. We are fortunate to have Hedman a few miles away and they have made us some EXCELLENT custom headers over the years.
MSD Plug Wires- Custom Fit
Custom Coil Brackets/Mounts
Radiator/stainless lines - All of this was previously on the car with the big block
FAST XFI Engine Management/Harness
Fuel Lines/Rails/FAST Flow Matched injectors/FP Regulator
01-19-2009, 04:22 PM
These pics were taken today 1/19/09... More pics coming soon!!!
Next week we will be installing all gauges/interior/cluster (custom built)/XFI system etc etc...
Will post pics as progress continues.
02-02-2009, 10:05 AM
Here are a few shots of the cluster being made...
Marker lights are for:
left/right turn signal
yellow- check engine
blue- high beam
Remember, this IS a street car :D :D
02-02-2009, 10:28 AM
That thing is looking SICK!!!
vBulletin® v3.7.4, Copyright ©2000-2013, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO