isenegger

im looking for a 1.5" or so one that i can put on the end of my fuel rail and leave underhood. i saw a few on summit but i cant tell if they have the adapter for the fuel rail. what do yall have, where did u get and pics would be nice.

isenegger

anyone?

Monello

iTrader: (1)

Speed Inc has them, they are a sponser.

isenegger

so just the gauge and the adapter listed below. is there one from summit or jegs with adapter that is liquid filled?

isenegger

ttt..

The Alchemist

iTrader: (19)

Just curious, what's the benefit of putting a fuel pressure gauge where you can't see it while driving? I guess it's a benefit at idle with the hood popped, but most of the time the issue is when you go wot and high rpm that pressure drops.

isenegger

true and im having problems with fuel pressure. it drops when rpms increase. ok so if i was to mount it on the pillar with other gauges what parts would be needed? such as sending unit or what not?

Soul TKR

iTrader: (4)

http://www.autometer.com/cat_gaugede...gid=2570&sid=4

The Alchemist

iTrader: (19)

That way you can take the signal wire as well and log the data if you have data aquisition software like Hptuners. That's my goal because I can then monitor if my fueling issues are related to tune or fuel pressure.

isenegger

i just wanna keep tabs on fuel pressure. i would love it in the car. but what piece do i need to adapt the fuel rail to 1/8" NPT

The Alchemist

iTrader: (19)

Everything you need is in that kit. It contains the sending unit that plugs into the end of our rails, the wiring, and the gauge to go inside the car. Click on the install instructions and you can see what's needed to be done to run it.

405HP_Z06

iTrader: (11)

You need one of these:



http://www.casperselectronics.com/st...oducts_id=1337

isenegger

cool thanks guys!