1badrz28

iTrader: (6)

Do they fit under the factory valve covers with out hitting?


Thanks,

HavATampa

iTrader: (49)

Yes. I've been running them for a few years. I believe the '98 model engines with the perimeter bolt valve covers are the ones that rub.

1badrz28

iTrader: (6)

Thank you.

405HP_Z06

iTrader: (11)

It depends. We installed these on a 2003 Z06 and the heads and valve covers required clearancing. Not saying this will be the case for you, but don't be surprised if you have to clearance.

teke184

iTrader: (5)

mine cleared the valve covers no problem.

but i had to remove 1/16" of material from the inside edge of the valve cover gasket surface on the head to clear the top edge of the rocker.

it was nothing 5 mins with a hand file didn't take care of.

picture:

CriminiSS

iTrader: (16)

^^^^^^^ I had the same problem. again not a big deal at all though.