Striker

iTrader: (1)

I saw someone with the screamin chicked done up nicely on their lid that was made from white vinyl, I believe. Also someone made a post showing their ASC# on the lid. I know there are some out there, and im just looking for some ideas.

Lets see your custom lids!

firehawk#682

iTrader: (19)

Here is mine not to fancy but i like it.

SOMHawk27

iTrader: (1)

Nice hawk and hears mine

sstg

iTrader: (5)

I'm getting mine done now by pontiacfan.SLP blackwing lid with the flamin chicken.I'll post pics when there done.

Cobra2WS6

iTrader: (22)

mycamaroSS

iTrader: (4)

holy **** that's tight dude! If only my hood didnt rub against my lid

z28_n_tx

iTrader: (7)

simple.... but flows with the car

khibbets

iTrader: (1)

3.8fury

iTrader: (2)

^^^^^^^^^^^^^


Dammmmmmmmmmmmmmnnn that is pure sexiness. I want your engine compartment

unSStoppable

iTrader: (1)

nothing real special but it looks cleaner than stock. Painted it and some other detail pieces satin black

Striker

iTrader: (1)

So which lid does NOT scrape up against the stock hoods? Is the SLP one OK?

travisnd

iTrader: (21)

The SLP Performance Parts lid usually rubs, however, the SLP Blackwing lid usually does not rub.

streetassasin

iTrader: (30)

my slp rubs

The Alchemist

iTrader: (19)

Here's what mine used to look like before I got a Fast toys 85mm lid.

PontiacFan

iTrader: (104)

The newer SLP lids with the hot-stamp white-in-color 'SLP', with the crease along the top, like shown above in the NBM-Firehawk set, & the Silver-Z28 set, do not rub.
If you have one that is, check to see if it has the added foam gasket. You may not need that gasket in there. Also make sure it is installed correctly. There have been issues in the past where they were not seated properly with the side lip position.

I'm not gonna post up all the photos of the lids that I've done over the years, but if ya wanna see a few, check out pages 5-8 in my Webshots album; http://rides.webshots.com/album/265016994MLlQBz

firehawk#682

iTrader: (19)

^ very nice work!

sstg

iTrader: (5)

Ya Pontiacfan rocks!Nice guy to. Can't wait for mine to be done.

99zee

iTrader: (4)

My SLP lid didn't rub until it was painted.

hlaalu

iTrader: (3)

Striker

iTrader: (1)

Thats exactly what i'd want except with the bird being the same design thats on my car (stock) Where did you get this done?