2001 ws6 408 dyno
#1
12 Second Club
Thread Starter
iTrader: (6)
Join Date: Jul 2005
Location: Chitown-Jax NC-Jax FL-Honolulu-OKC, OK-NOW New Orleans Area
Posts: 626
Likes: 0
Received 0 Likes
on
0 Posts
2001 ws6 408 dyno
This was done by a tune shop in OKC, and through a STOCK MAF. Car is now sold and has a new owner
Patriot Stg 2 317 heads on it.
Trending Topics
#8
12 Second Club
Thread Starter
iTrader: (6)
Join Date: Jul 2005
Location: Chitown-Jax NC-Jax FL-Honolulu-OKC, OK-NOW New Orleans Area
Posts: 626
Likes: 0
Received 0 Likes
on
0 Posts
6speed, 408 ci, cam was a 248/254, .611/.613 113LSA, Hooker 1 3/4 long tube, off road Y pipe, GMMG exhaust, fast 90 NW 90, STOCK MAF, MTI Clear Lid. K&N Filter, 42lb injectors, Patriot Stage 2 317 heads. Stock rear end with 3.42 gears. Tires where 315/35/17s. From what I was told by the shop is that their dyno normally reads about 10-15hp lower than the rest of the state of OK.
#13
Restricted User
iTrader: (43)
Join Date: Nov 2001
Location: Pittsburgh, PA
Posts: 2,669
Likes: 0
Received 0 Likes
on
0 Posts
You keep bolding the STOCK MAF, I think you should be bolding Patriot Heads instead. All of the dyno sheets I have seen so far with Patriot Heads are all in the 480rwhp range.
#15
12 Second Club
Thread Starter
iTrader: (6)
Join Date: Jul 2005
Location: Chitown-Jax NC-Jax FL-Honolulu-OKC, OK-NOW New Orleans Area
Posts: 626
Likes: 0
Received 0 Likes
on
0 Posts
I ran it at the track. Here is the video but mine is the last 20 sum or so seconds.
http://www.youtube.com/watch?v=KywLiSEZYu0
http://www.youtube.com/watch?v=KywLiSEZYu0