o2 bank 1 and bank 2 #1 pcm wire ?????
10-09-2003, 01:05 PM
#1
o2 bank 1 and bank 2 #1 pcm wire ????? for hooking up o2 guages to each side, should I run a wire down to the o2's or is there a particular wire on the pcm that would be much easier to "tap" into?, wich ones for both the front censors?, cant remember off the top of my head but there's 2 sets of 32 wires right, 1st on top and 2nd on bottom? 
10-09-2003, 10:18 PM
#5
Staging Lane
Join Date: Mar 2002
Location: South of the Mason-Dixon
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Re: o2 bank 1 and bank 2 #1 pcm wire ?????
10-10-2003, 05:07 AM
#6
Launching!
iTrader: (1)
Join Date: Feb 2003
Location: Huntsville, AL
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
Re: o2 bank 1 and bank 2 #1 pcm wire ?????
for hooking up o2 guages to each side, should I run a wire down to the o2's or is there a particular wire on the pcm that would be much easier to "tap" into?, wich ones for both the front censors?, cant remember off the top of my head but there's 2 sets of 32 wires right, 1st on top and 2nd on bottom?
http://www.ls1.com/enginetorques.htm
On my 02 LS1, I ran a tap on numbers 66 and 69 to get B1S1 and B2S2. Seems to work wonderfully.