my thirdgen finally lsx powered!
02-12-2009, 09:00 AM
#1
my thirdgen finally lsx powered! just a little 11:1 347 with a baby cam and stock 241's, but it's mine non-the-less! getting very close to starting her up. i gotta make a trans crossmember and build the exhaust, round up a few stray sensors and finish up the wiring harness. let me know what you think!
sitting in it's proper home with Hawks LT's:
RPM stage V 4l60e with a fresh rebuild by local OD guru Gary Marshall with red alto clutches and kolene steels (i guess i can't really say it's an RPM trans anymore, eh?) going between the two is a VIG3600
and some basic pics of the rest of the car:
sitting in it's proper home with Hawks LT's:
RPM stage V 4l60e with a fresh rebuild by local OD guru Gary Marshall with red alto clutches and kolene steels (i guess i can't really say it's an RPM trans anymore, eh?) going between the two is a VIG3600
and some basic pics of the rest of the car:
02-12-2009, 09:14 AM
#3
TECH Fanatic
iTrader: (9)
Join Date: Aug 2007
Location: Rocky Mtn thin air & snow...
Posts: 1,237
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by thirdgenbum
getting very close to starting her up. i gotta make a trans crossmember and build the exhaust, round up a few stray sensors and finish up the wiring harness. let me know what you think!
Still, you're a little bit further along than I am, so I just sat here for a second & soaked in the pic of the engine in the thirdgen bay... 
(Hopefully I can get mine stabbed in next week.)
Originally Posted by thirdgenbum
and some basic pics of the rest of the car:
Nice progress, keep it up!
Trending Topics
02-13-2009, 09:30 PM
#15
alright, got the 4l60e crossmember all fabbed up using a stock thirdgen one to build off of (thanks sean!) i also built my y-pipe and will build the rest of the system at some point next week i hope. (maybe tuesday)
it'll take a couple of tweeks, but the pipes coming off the collectors are on exactly the same plane as the collectors, and the y is slightly above the plain, the pictures through it off by the angle i had to be at in order to take the pics:
it'll take a couple of tweeks, but the pipes coming off the collectors are on exactly the same plane as the collectors, and the y is slightly above the plain, the pictures through it off by the angle i had to be at in order to take the pics:
