Rebel Ls1

iTrader: (4)

Hi,

Was wondering if someone can assist me with information on after market 1.8:1 ratio roller rockers to suit the L76/L92/LS3 engines. These are the ones that have an offest on the inlet rocker.

I am informed that some require additional machining to the heads, rockers and valve covers. Which I would like to stay clear-off.

Basically, the car (image below) an (A6) will be retuned daily drive with aftermarket bolt-ons and 918 springs. Will never see over 6500rpm.




Thought I might gain some bottom-end with the addition oof these rockers.

I would sincerely appreciate any information on rocker sets that are available in the market place that are straight replacement do not reqiuire any machining.

Cheers,

Mark
Sydney, Australia.

Wnts2Go10O

iTrader: (12)

yella terra or jesel are the ones off the top of my head with rockers being designed by comp, crane, harland sharp?, and a couple others

Rebel Ls1

iTrader: (4)

Thank you for the information, but, more precisely I would like to find out which ones will meet the chriteria as I asked, being, to the job without the need of clearance machinining etc.

Cheers.

Disturbed Bird

iTrader: (9)

yella terras

Beau@SDPC

iTrader: (14)

I do believe the cranes can be used without machining...as I have a customer right now with a TVS blower system on his tahoe using them. 402/L92 heads. Its a monster.

We have them in stock ready to ship anywhere, and we do alot of business with yall aussie guys too

$730 plus the shipping.

Thanks
John

Rebel Ls1

iTrader: (4)

Hi John,

Thank you for the information.

Will revert to you once make decission.

Cheers,