91ZLS6

iTrader: (2)

Hey Everyone.

Ive been trying to remove the ASP underdrive off our spare LS1.

I tried a 3 claw puller grabbing on the back and pulling, got no where, put 3 bolts on and used a 3 claw grabbing on the heads, and then the puller arms all stressed and snapped.

Our 3 bolt puller wont reach the bolts, as in it doesnt span wide enough.

Is there any other options? This things moved maybe .050" of a inch.

Im ready to throw this motor through a wall

Help!

Grimes

iTrader: (3)

You have to find a puller that can accommodate three bolts that fit into the pulley. There's no other way to get it off.

HavATampa

iTrader: (49)

Buy one of these "quality" pullers from Sears and get you 3, grade 5, 5/16-24 fine thread bolts to screw into the ATI pulley. Mine didn't come with bolts to fit the ATI.




http://www.sears.com/shc/s/p_10153_12605_00947626000P

RZRSEDGE

iTrader: (21)

^^^^^^^ That's the only one that I've used and it works like a champ! WAY easier to get off than the stock pulley. Good luck!