1SLwLS1

iTrader: (6)

I have been doing a lot of reasearch on the cam swpa without removing intake and ran accross the lifter lock tool. Seems so simple and baffles me to why anyone would pay over 100 bux for it. I see some people have been using homemade tools to replace via magnets and what not through the pushrod access.

Anyone know the size of rod to slide through the front of the block?

Sorry if this is a repost, I have searched, but came up empty handed on specs

ABQ99TA

iTrader: (17)

5/16 rod, and you would have to pull the heads to get to the lifters not the intake.

1SLwLS1

iTrader: (6)

thanks, I thought you would need to remove the intake and heads to get to the lifter valley?

red83

iTrader: (64)

5/16 smooth wooden dowl rod is what i use.

.99 at a hardware store

sroach20

iTrader: (31)

you do, i dont know why the other guy thought you were talking about replacing the lifters.

1SLwLS1

iTrader: (6)

thanks I thought I lost my marbles

thanks guys