Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

How much power?

Old 02-16-2009, 11:58 PM
  #1  
On The Tree
Thread Starter
iTrader: (3)
 
jpajkos's Avatar
 
Join Date: May 2007
Location: Roseville, CA
Posts: 122
Likes: 0
Received 0 Likes on 0 Posts
Default How much power?

I have a friend who's wondering what you guys think he will dyno. Here are his mods. Of course all this is Based on a good tune. I figured anywhere from 440-460 rwhp. What do you guys think?


Hooker Ceramic coated Longtubes w/ ory

Cut-out

.232-.234 w/ .646-.613 on a 111 lsa

Fast 90/90

Patriot Stage 2 243 casting heads w/ Patriot Gold Duals spring, titanium retainers, seat etc etc etc 64cc chambers.

Powerbond 25% UDP

SLP Lid

Ported Descreen 85mm MAF

All free mods

F.A.S.T. 42lb injectors

Stock 4l60e w/ SMI Built 4000 Stall w/ 2.5 STR w/ Hayden 29k cool cooler

160 T-Stat

3.23 gears

Ported LS6 Oil pump (not that it matters)

LS2 timing chain (not that it matters)

Last edited by jpajkos; 03-04-2009 at 10:20 PM.
Old 02-17-2009, 01:50 AM
  #2  
TECH Fanatic
iTrader: (6)
 
IWGF's Avatar
 
Join Date: Dec 2008
Location: Aztec, NM
Posts: 1,269
Received 0 Likes on 0 Posts

Default

I'll say 435 RWHP. What do I get if I win?
Old 02-17-2009, 02:04 AM
  #3  
TECH Enthusiast
 
lookin4aTA's Avatar
 
Join Date: Dec 2005
Location: Owasso,Ok/Honolulu, HI
Posts: 530
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by IWGF
I'll say 435 RWHP. What do I get if I win?
The thought of knowing you won lol

I'd say 440-450 would be about right.
Old 02-17-2009, 02:43 AM
  #4  
11 Second Club
iTrader: (3)
 
00MaroonZ28's Avatar
 
Join Date: Sep 2007
Location: Brooklyn Center, MN
Posts: 792
Likes: 0
Received 0 Likes on 0 Posts

Default

Almost the same set-up as me.

If he already has LT headers and an exhaust I'll say 425 rwhp. If not, I'll say 400.
Old 02-17-2009, 04:30 AM
  #5  
TECH Fanatic
iTrader: (6)
 
IWGF's Avatar
 
Join Date: Dec 2008
Location: Aztec, NM
Posts: 1,269
Received 0 Likes on 0 Posts

Default

Originally Posted by lookin4aTA
The thought of knowing you won lol

I'd say 440-450 would be about right.
Darn, I was hoping for a prize
Old 02-17-2009, 07:34 AM
  #6  
TECH Junkie
iTrader: (5)
 
teke184's Avatar
 
Join Date: Feb 2007
Location: Key West, Florida
Posts: 3,183
Likes: 0
Received 0 Likes on 0 Posts
Default

auto...big stall...

i'll say 435.5rwhp
Old 02-17-2009, 07:53 AM
  #7  
TECH Addict
iTrader: (31)
 
sroach20's Avatar
 
Join Date: Dec 2002
Location: houston, Texas
Posts: 2,318
Likes: 0
Received 0 Likes on 0 Posts
Default

is this before or after the tranny explodes?
Old 02-17-2009, 10:48 AM
  #8  
On The Tree
Thread Starter
iTrader: (3)
 
jpajkos's Avatar
 
Join Date: May 2007
Location: Roseville, CA
Posts: 122
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by sroach20
is this before or after the tranny explodes?
Before! there are quite a few guys I know who have auto's with no fast intake pushing 420-430... I would think at least 450 but I might be off on this one. Whoever is closer gets a prize.. What the prize is only time will tell!
Old 02-17-2009, 10:52 AM
  #9  
On The Tree
Thread Starter
iTrader: (3)
 
jpajkos's Avatar
 
Join Date: May 2007
Location: Roseville, CA
Posts: 122
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 00MaroonZ28
Almost the same set-up as me.

If he already has LT headers and an exhaust I'll say 425 rwhp. If not, I'll say 400.
If you don't mind me asking, what did you put down? Nice setup BTW! 11 second club? low 11s?
Old 02-17-2009, 02:07 PM
  #10  
11 Second Club
iTrader: (10)
 
tacklebox's Avatar
 
Join Date: Dec 2005
Location: Finksburg, MD
Posts: 350
Likes: 0
Received 0 Likes on 0 Posts

Default

What kind of dyno is it?
Old 02-17-2009, 05:46 PM
  #11  
On The Tree
Thread Starter
iTrader: (3)
 
jpajkos's Avatar
 
Join Date: May 2007
Location: Roseville, CA
Posts: 122
Likes: 0
Received 0 Likes on 0 Posts
Default

Most likely a Dyno dynamics,

Last edited by jpajkos; 03-04-2009 at 10:21 PM.
Old 02-17-2009, 06:39 PM
  #12  
TECH Resident
iTrader: (490)
 
one fast zo6's Avatar
 
Join Date: Jan 2008
Location: Austin, Texas
Posts: 791
Received 0 Likes on 0 Posts

Default power

i would say about 420rwp
Old 02-17-2009, 06:46 PM
  #13  
TECH Fanatic
iTrader: (28)
 
johnLs1camaro's Avatar
 
Join Date: Nov 2006
Location: NA,Indiana/louisville, ky
Posts: 1,757
Received 4 Likes on 4 Posts

Default

i say 439 rwhp!
Old 02-17-2009, 07:52 PM
  #14  
TECH Fanatic
iTrader: (30)
 
STEEPSS's Avatar
 
Join Date: Mar 2008
Location: Ankeny, IA
Posts: 1,334
Likes: 0
Received 2 Likes on 2 Posts

Default

hmm. through a stalled auto. if it were M6 i'd give it 450-460. that's one reason i don't like dynos. lol auto guys always lose in HP battles. oh well it's all about how they move i guess.
Old 02-17-2009, 09:20 PM
  #15  
10 Second Club
iTrader: (13)
 
First Collision's Avatar
 
Join Date: Mar 2006
Location: Baytown, TX
Posts: 227
Likes: 0
Received 0 Likes on 0 Posts
Default

425...
Old 02-17-2009, 09:21 PM
  #16  
On The Tree
Thread Starter
iTrader: (3)
 
jpajkos's Avatar
 
Join Date: May 2007
Location: Roseville, CA
Posts: 122
Likes: 0
Received 0 Likes on 0 Posts
Default

Wow my auto with just lid, lt's, 85mm maf, ported tb put down 329. I would think the cam is worth at least 50 along with the heads would be at least 50 and the fast about 20? Thats pretty crazy all that stuff is only going to gain him 80 more to the ground.
Old 02-17-2009, 09:33 PM
  #17  
11 Second Club
iTrader: (12)
 
frito1's Avatar
 
Join Date: Nov 2005
Location: Ottawa, KS
Posts: 402
Likes: 0
Received 0 Likes on 0 Posts
Default

^^ That was with a stock verter?

My setup put down 419 on a dynojet......
Old 02-17-2009, 10:42 PM
  #18  
On The Tree
Thread Starter
iTrader: (3)
 
jpajkos's Avatar
 
Join Date: May 2007
Location: Roseville, CA
Posts: 122
Likes: 0
Received 0 Likes on 0 Posts
Default

No one said anything about a stock converter.... A stall isn't going to add any power..
Old 02-17-2009, 11:19 PM
  #19  
TECH Enthusiast
iTrader: (9)
 
BerryWS6's Avatar
 
Join Date: Dec 2003
Location: Edmond,OK
Posts: 563
Likes: 0
Received 0 Likes on 0 Posts

Default

424rwhp 385tq with a locked converter.
Unlocked 395hp
Old 02-18-2009, 01:03 AM
  #20  
TECH Fanatic
iTrader: (6)
 
IWGF's Avatar
 
Join Date: Dec 2008
Location: Aztec, NM
Posts: 1,269
Received 0 Likes on 0 Posts

Default

Originally Posted by jpajkos
No one said anything about a stock converter.... A stall isn't going to add any power..
Wow. I hope you're being sarcastic because stalls effect dynographs a lot...

Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:39 AM.