madclown

iTrader: (4)

I just ordered one of these with the Midwest 9". Any opinions good or bad about them????

ElChiefWS602

iTrader: (1)

See this link:


https://ls1tech.com/forums/gears-axl...-get-them.html

Bad30th

iTrader: (13)

I ordered one with my Midwest 9" too, it arrived already and looks pretty stout...

My 9" is supposed to arrive today or tomorrow so I'll post install pics and some feedback when I get it in, probably this weekend.

Rob (Bad30th)

jmm98LS1

iTrader: (28)

I've got one in my car with a Moser 9". Vibration free all the way to 120mph.

Intercooler2

iTrader: (24)

I'm swapping it tomorrow to see. I doubt if the flexplate or converter could be the issue but you can never tell. My vibration is crazy!

koolaid_kid

iTrader: (21)

I guess they vary, like most other things. 20k miles on mine, no vibration, even at high speed.

Giddswat

iTrader: (13)

I also have one, and have no issues with vibrations. I had some vibration due to the pinion angle being off, but that was corrected and everything is smooth now.

ajrothm

I also have one..... smooth as can be cruising at 90 mph....

rsodeputy61

can u not reuse the stocker with the midwest 9?

Bad30th

iTrader: (13)

You can but you'd need to change the yoke on it. Eric gives a sweet discount on the chromoly DS with the package (and if you're buying a 9" you prolly need it) so I went for it...

Rob (Bad30th)

madclown

iTrader: (4)

Is $295 the discount price, and if so how much are they normally?

rsodeputy61

geez, i'm never gonna finish with my car!!

Intercooler2

iTrader: (24)

Found my issue tonight so just wanted to update. Go ahead and get that Strange driveshaft! We failed to put the clips on the universal. We put them in and it is smooth as can be. I had it up to 120 MPH tonight and not a shake!

9t8z28

iTrader: (19)

I just got a used Chromoly Strange driveshaft with spicer ends. It is one stout piece and is vibration free with 100 miles so far.