SpeedDensityZ

iTrader: (5)

I'm looking for a parts list and possibly some pictures of some oil catch can setups. I did some reading on here and found a little bit but, all the threads were old and didn't have much info on how to set it up. Just curious to see what you're running.

-Thanks

James Montigny

iTrader: (13)

This is what I used -> http://www.thunderracing.com/catalog...&sid=776#P5920
Got the info here -> https://ls1tech.com/forums/lt1-lt4-m...ng-how-do.html

Speed Density

iTrader: (38)

I just did a catch can on my vette today and it seems to be working pretty well.

I used a Kobalt air compressor filter kinda like the husky filter from home depot that everyone used a few years back. Cost me $14 to do and looks clean as my toilet.

SpeedDensityZ

iTrader: (5)

I seen that thread earlier but, the pics wouldn't come up for me. Hopefully speeddemon still has them hanging around and will post them up for me.

SpeedDensityZ

iTrader: (5)

Nevermind, should have read the entire thread.

fergymoto

iTrader: (129)

I did the same thing with the Kobalt filter back in early 2007. It works good.

krill

James, do you have any pics of where you mounted it? Im looking to do the same thing!

Thanks

krill

cmon!

James Montigny

iTrader: (13)

I don't at the moment, but I'll take some when the car gets back from the chassis shop.
I'm having a 6-point CM rollbar welded in this weekend.

Edit: Can is mounted to the coil stud on the driver's side, hoses connect it to the manifold.
Here's an old pic where you can see the top of it.

speed_demon24

iTrader: (6)

I have the mike norris catch can mounted to a coil stud and a breather in each valve cover with the fresh air hose deleted. I tried keeping the fresh air hose but no matter what I did oil was still getting in through the throttle body.