LS2 into WS6
02-20-2009, 09:08 AM
#1
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Mar 2007
Location: Middle east , Kuwait
Posts: 1,591
Likes: 0
Received 0 Likes
on
0 Posts
LS2 into WS6 Hi guys , in few days i'll buy LS2 complete engine it's ready to run and i'll install it into my WS6 , so what i need to complete this setup ?
02-20-2009, 12:35 PM
#2
TECH Fanatic
iTrader: (19)
Join Date: Jan 2005
Location: Phoenix AZ
Posts: 1,034
Likes: 0
Received 0 Likes
on
0 Posts
By ready to install what do you mean? Ls2 uses different valley cover, cam position sensor, knock sensors need to be relocated, and it has to have the 24X reluctor on the crank.
02-20-2009, 01:17 PM
#5
Some LS2s were 24x....you need to make sure. As far as what all else is needed....there is a knock/cam sensor harness extension available.
$59.95 from us.
Then a cable driven TB with a bracket for the cable.
If it is a 58x engine, just use the Lingenfelter 24x to 58x adapter, its around $300.
That is pretty much it, except you need to change the oil pan/dipstick/pickup to the F body style.
$59.95 from us.
Then a cable driven TB with a bracket for the cable.
If it is a 58x engine, just use the Lingenfelter 24x to 58x adapter, its around $300.
That is pretty much it, except you need to change the oil pan/dipstick/pickup to the F body style.
