procharged thirdgen
#1
On The Tree
Thread Starter
Join Date: Dec 2008
Location: Lino Lakes, MN
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
procharged thirdgen
I have a 91 camaro that I would like to swap a 408 and a D1 or possibly an F1 into. Is there anyone out there with this setup? Some info and some pics would be great.
#2
I don't think the 98-02 f body ProCharger system will fit and I don't think the GTO bracket assembly will fit either. Your best bet would probably be the C5/C6 bracket assembly. http://www.exoticperformanceplus.com...l?category=336 Here is a link to the piece parts that would be needed. Bob
#3
Staging Lane
iTrader: (9)
Join Date: Oct 2006
Location: new york
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
the only problem with that, is that you would not be adle to run the intake tubing over the radiator because it sits higher in a thirdgen, you would have to make a 90 degree bend on the intake side of the supercharger, and i don't think there is enough room inbetween the supercharger and the radiator to do that.
#4
On The Tree
Thread Starter
Join Date: Dec 2008
Location: Lino Lakes, MN
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
#5
What about this kit?
https://ls1tech.com/forums/forced-in...ansplants.html
https://ls1tech.com/forums/forced-in...ansplants.html
#7
Staging Lane
iTrader: (9)
Join Date: Oct 2006
Location: new york
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
if the LSX transplant kit is the same dimensions as the SBC procharger universal kit, Then it should work. I've wanting to put one of these in my ls1 powered 87 camaro for a while. I've been talking to Bob from E.P.P. trying to find out when this kit comes out, he said it might be out next week.
Trending Topics
#10
if the LSX transplant kit is the same dimensions as the SBC procharger universal kit, Then it should work. I've wanting to put one of these in my ls1 powered 87 camaro for a while. I've been talking to Bob from E.P.P. trying to find out when this kit comes out, he said it might be out next week.
#11
On The Tree
Thread Starter
Join Date: Dec 2008
Location: Lino Lakes, MN
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
#12
On The Tree
Thread Starter
Join Date: Dec 2008
Location: Lino Lakes, MN
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Hopefully somebody tries this before I get around to it. I dont like being the gineau (sp) pig.
#14
Staging Lane
iTrader: (9)
Join Date: Oct 2006
Location: new york
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
well I,ve been wanting to try this kit out for a while so Bob I will give you a call some time this week. Here is a pic of a universal sbc bracket in a thirdgen.
http://www.procharger.com/gallery/sh...ket=3&idx=1252
http://www.procharger.com/gallery/sh...ket=3&idx=1252
Last edited by irocbmx; 03-03-2009 at 06:05 AM.
#16
stephens1987camaroirocls16spdststurbo.aspx
#17
Staging Lane
iTrader: (9)
Join Date: Oct 2006
Location: new york
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Hate to burst your bubble but there have been FI LSx thrid gen's for quite a few years (2006 and earlier).
stephens1987camaroirocls16spdststurbo.aspx
stephens1987camaroirocls16spdststurbo.aspx
#18
On The Tree
Thread Starter
Join Date: Dec 2008
Location: Lino Lakes, MN
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
well I,ve been wanting to try this kit out for a while so Bob I will give you a call some time this week. Here is a pic of a universal sbc bracket in a thirdgen.
http://www.procharger.com/gallery/sh...ket=3&idx=1252
http://www.procharger.com/gallery/sh...ket=3&idx=1252
#19
well I,ve been wanting to try this kit out for a while so Bob I will give you a call some time this week. Here is a pic of a universal sbc bracket in a thirdgen.
http://www.procharger.com/gallery/sh...ket=3&idx=1252
http://www.procharger.com/gallery/sh...ket=3&idx=1252
#20
The P600B worked good in it's day, but today most people want more horsepower than this small blower can provide. Give me a call for prices.
260 244-4808. Thanks. Bob