I need more power ( PIC OF A 2010 CAMARO SS)
02-27-2009, 10:10 PM
#1
Teching In
Thread Starter
Join Date: Jan 2009
Location: san antonio
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
I need more power ( PIC OF A 2010 CAMARO SS) I need more power. I got the car dyno tuned today the hp was 340, the torque was at 345. Looking for a cam and headers. Can someone tell me a good set up? Here is some pic of the 2010 camaro ss
Last edited by bad98camaro; 02-27-2009 at 10:53 PM.
02-27-2009, 10:21 PM
#3
Teching In
Thread Starter
Join Date: Jan 2009
Location: san antonio
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
san antonio tx (chevy dealership) daily drive yes keep that way? yes spend ?whatever gets me 410hp i got 340hp now future mods? heads and cam.
Last edited by bad98camaro; 02-27-2009 at 10:27 PM.
Trending Topics
02-28-2009, 09:13 AM
#9
TECH Fanatic
Join Date: Feb 2004
Location: Lexington, KY
Posts: 1,259
Likes: 0
Received 0 Likes
on
0 Posts
02-28-2009, 10:00 AM
#10
If you are putting down 340HP and 345ft/lb, you'd have to see which bolt ons are there. I suspect exhaust has been done on that to get those numbers, possibly intake as well as those aren't stock 98 dyno numbers.
Heads and cam should bring it to well above 400HP at the wheels which will be closer to the retail "500 hp" super car advertised levels which is all crank HP.
Heads and cam should bring it to well above 400HP at the wheels which will be closer to the retail "500 hp" super car advertised levels which is all crank HP.
03-01-2009, 08:19 AM
#15
Teching In
Thread Starter
Join Date: Jan 2009
Location: san antonio
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
mods on car
k&n cold intake
85mm bbk throttle body
ls6 intake
long headers
slp loudmouth exhaust
373 gears
3000 stall
stage 3 transmission from performabuilt
k&n cold intake
85mm bbk throttle body
ls6 intake
long headers
slp loudmouth exhaust
373 gears
3000 stall
stage 3 transmission from performabuilt
