Generation IV Internal Engine 2005-2014 LS2 | LS3 | LS7 | L92 | LS9

Video of Yella Terra rockers - LS2-L92-StreetSweeper-HT

Thread Tools
 
Search this Thread
 
Old 02-28-2009, 03:16 PM
  #1  
TECH Apprentice
Thread Starter
iTrader: (1)
 
ShoddyHog's Avatar
 
Join Date: Jan 2008
Location: Festus, MO
Posts: 311
Likes: 0
Received 1 Like on 1 Post
Default Video of Yella Terra rockers - LS2-L92-StreetSweeper-HT

I posted this on the GTO forum, and thought I would share here. This is a video of under-hood sound of my Yealla Terra roller rockers. These things are worth their weight in gold. Eventually, I hope to find the other videos I've made of me going through the same drive-through at a local St. Louis Bread Co. for comparison from stock + headers, cam only, and now the L92s with Yella Terras installed. Even stock, I used to be embarrassed at going through drive-throughs. Not anymore. They were a little louder (barely) when first installed, but quieted down after a couple thousand miles.

http://www.youtube.com/watch?v=LQ_ufG6gSH0

Rockers: Yella Terra 1.7 installed with L92 heads
Miles at time of video: About 16,000 on L92s / 86,000 on LS2 bottom end.
Heads: Texas Speed L92s milled 0.030"
Cam: FTI StreetSweeper-HT 228/232 .612/.600 111
Pushrods: Flowtech 7.400"
New lifters: Stock LS7
Shims: None used
Clearance issues: None
Lifter preload & geometry both checked on installation
PTV clearnance checked on install - no fly cutting

Gerry
Old 03-30-2009, 10:16 PM
  #2  
Dom
TECH Fanatic
iTrader: (2)
 
Dom's Avatar
 
Join Date: Nov 2001
Location: Chicago
Posts: 1,381
Likes: 0
Received 1 Like on 1 Post

Default

Nice. Can't even hear you have a cam. I've been contemplating trading in my Z for LS2 GTO and I'm leaning towards your setup. Did you make a 1/4 pass yet with all your mods? What about a dyno? If not, how did it feel after putting the heads on?



Quick Reply: Video of Yella Terra rockers - LS2-L92-StreetSweeper-HT



All times are GMT -5. The time now is 07:33 AM.