100mm lid/maf/tb/intake manifold anyone make this?
#1
100mm lid/maf/tb/intake manifold anyone make this?
like the title says who makes a 100mm lid a 100mm maf a 100mm tb and 100mm intake manifold for a ls1? I have seen tsp has a maf already and a lid in the works but does anyone offer a lid now? as well as my options for 100mm tb and intake manifold?
Trending Topics
#9
TSP and Lingenfelter offer the 100 mm MAF. Quite a few people have taken our Fast Toys air lid and used it in conjuction with those MAF's. Some customers have told us they heated up the neck of the Fast Toys air lid in boiling water and then were able to slide the 100mm MAF right in (that would be at your own risk though!).
#10
TECH Addict
iTrader: (35)
Join Date: Dec 2005
Location: Cherry Hill, NJ
Posts: 2,373
Likes: 0
Received 0 Likes
on
0 Posts
TSP and Lingenfelter offer the 100 mm MAF. Quite a few people have taken our Fast Toys air lid and used it in conjuction with those MAF's. Some customers have told us they heated up the neck of the Fast Toys air lid in boiling water and then were able to slide the 100mm MAF right in (that would be at your own risk though!).
#13
Staging Lane
iTrader: (5)
Join Date: Apr 2002
Location: Oakland County MI
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
i was going to say would a 100mm lid even let the hood shut? my car has an slp lid that already rubs, and i have a fast toys lid waiting to go on, i just have to cut it down so it wont rub any worse than my slp one does.
#14
OWN3D BY MY PROF!
iTrader: (176)
- Wilson, Accufab, and RevXtreme all make 100+mm throttle bodies
- For the intake manifold you can modify a Fast and LS7 intake to take a 100mm throttle body. I'm not sure on the L76 intakes. You can also use a single plane with an elbow with the correct flange and size for an 100+mm throttle body. Same thing with sheet metal intakes.
- TSP, Lingenfelter, and another company that I can't think of the name of right now have 100mm Mafs.
- TSP is working on the 100mm lid. We'll see when it comes out. I've been hearing a few more weeks for a couple months now.
- For the intake manifold you can modify a Fast and LS7 intake to take a 100mm throttle body. I'm not sure on the L76 intakes. You can also use a single plane with an elbow with the correct flange and size for an 100+mm throttle body. Same thing with sheet metal intakes.
- TSP, Lingenfelter, and another company that I can't think of the name of right now have 100mm Mafs.
- TSP is working on the 100mm lid. We'll see when it comes out. I've been hearing a few more weeks for a couple months now.