Lock up on 2-3 shift?
#1
TECH Enthusiast
Thread Starter
iTrader: (3)
Join Date: Nov 2008
Posts: 726
Likes: 0
Received 0 Likes
on
0 Posts
Lock up on 2-3 shift?
Im wondering in a 98 formula with 4.10's tranny mods Trans go hd-2 kit 3700 stall and a MVB if i can lock up the verter in second and not unlock it for the 3rd shift.
Thanks for any input guys.
Thanks for any input guys.
#5
LS1Tech Sponsor
iTrader: (25)
I agree with Vince never lock during a shift. Its like hitting the trans with a sledgehammer.
You can turn the lockup off and on between shifts but the real question is why would you want to lock like that, The car unless the stall was badly chosen will be much faster unlocked. Thats what gives the auto the advanatage over the manual trans the torque multiplication of the converter.
You can turn the lockup off and on between shifts but the real question is why would you want to lock like that, The car unless the stall was badly chosen will be much faster unlocked. Thats what gives the auto the advanatage over the manual trans the torque multiplication of the converter.
__________________
#7
LS1Tech Sponsor
iTrader: (25)
In most cases yes now some people gain a little locking at the top of 3rd but if you need to lock before that you may have chosen to loose a converter.
Anyway you look at it though its dangerous to lock anyhwere near a shift with a switch since if you miss it could spell disaster-Trans/converter/drive shaft/rear end.
Anyway you look at it though its dangerous to lock anyhwere near a shift with a switch since if you miss it could spell disaster-Trans/converter/drive shaft/rear end.
__________________