XxApollynxX

iTrader: (2)

Got a 00' T/A with 43k miles, putting in a converter, cooler, built trans etc. Since it's sitting right there I thought should I replace it with a SFI Flexplate like from Speed Inc. or TCI or just leave it stock? Thoughts???

I tried searching didnt come up with anything.

jetlag

iTrader: (32)

I'm still using the stock one....but it wouldn't hurt to upgrade if you got the cash to spare.

XxApollynxX

iTrader: (2)

Man every time I see you post, your avatar makes me crack a smile!

Z28/2002

iTrader: (27)

Might as well upgrade while you have everything apart

01_ram-air

iTrader: (3)

It's good to spend the extra money on added safety. Never can go wrong there. I'm putting a TH400 in my car and I'm going with the one from Speed Inc.

XxApollynxX

iTrader: (2)

Looks like I will be going to pick one up. Any body know the torque spec on those bolts?

streetassasin

iTrader: (30)

When my trans and converter got put in it turned out the I had a crack from every converter bolt to the started gear on the flex plate, I got the speedinc. one and its a nice piece. It was only $180 overnighted from IL to TX. I ordered it at 11 am on a thursday and had it by 10 am the following friday

tording99Z28

iTrader: (3)

I am running the stocker but can be sure that the next time the tranny or converter have to come out I will be upgrading mine. Since you are in there probably a good time to go ahead and do it if you have the extra cash.