Question..........LS6 "CNC" Heads + Intake:
#1
On The Tree
Thread Starter
Join Date: Dec 2001
Location: Motown (The Real)
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Question..........LS6 "CNC" Heads + Intake:
What kind of numbers are you folks seeing with LS6 "CNC" machined heads and LS6 intake on your LS1? Not the stock 2002 405hp set-up but the CNC heads. Anybody tried this set-up yet? Seriosly considering it. I figured it's got to be at good for at least 450 horses, am I close? Also, how much torque?
#2
Restricted User
iTrader: (43)
Join Date: Nov 2001
Location: Pittsburgh, PA
Posts: 2,669
Likes: 0
Received 0 Likes
on
0 Posts
Re: Question..........LS6
I just put on a set of hand ported LS6 243 heads. I should make it to the track by next weekend. The flow numbers were really good so we will see.
#5
LS1TECH Sponsor
iTrader: (23)
Join Date: May 2003
Location: Tampa, FL
Posts: 1,168
Likes: 0
Received 0 Likes
on
0 Posts
Re: Question..........LS6
I have been able to make 461RWHP but that was with the best possible exh on a 03 ZO6 done by CNC. This was with a med cam and the car is unreal. ALMOST LIKE STK. I am a WD for them But we had some special things done to the heads to get that kind of power. But you will not be dissappointed. The owner has taken the car beyond the end of the speedo by an inch so my fair and totally resonable guess is that 210mph on stk 3.42 gears. PM me. I can nail it down and give you some more info.
Jeremy
Jeremy