Cam Install???
03-14-2009, 11:39 PM
#1
Staging Lane
Thread Starter
Join Date: Nov 2006
Location: Louisiana
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Cam Install??? Ok im planning on installing a gm847 cam into my 95 formula m6. Im planning on using the proform self aligning aluminum 1.6 ratio roller rockers and ls7 lifters. my question is what size pushrods do i need and what springs do i need. any help would be appreciated.
03-15-2009, 08:10 AM
#2
I successfully used Proforms on a much milder application but would not use them for that.
I also fail to understand why everyone doing a cam swap has to spend the money on LS7 lifters when stockers are fine and why they have to buy cams that are too big so maybe I am the one who doesn't know what I am doing. That cam is bigger than what I am running, hell it is bigger than what most guys with 355s run. Should be left to strokers.
I also fail to understand why everyone doing a cam swap has to spend the money on LS7 lifters when stockers are fine and why they have to buy cams that are too big so maybe I am the one who doesn't know what I am doing. That cam is bigger than what I am running, hell it is bigger than what most guys with 355s run. Should be left to strokers.
