briancox

iTrader: (1)

I have a bbk ssi intake now and i was wondering if it was the best intake if your gonna spray nitrous?

briancox

iTrader: (1)

anybody come on guys help me out!!!!!!!

Mike@HSW

iTrader: (6)

There really is no best intake, just the best intake for your application. Give us a lot more detail on what you are running and we can make some recommendations

briancox

iTrader: (1)

ls1 with forged pistons, 590 lift comp cam, dart pro heads gonna be running a 250 shot

Mike@HSW

iTrader: (6)

FAST 92 or a Vic Jr/GMPP would be fine for your application.

briancox

iTrader: (1)

ok isnt the vic jr set up for carb

Mike@HSW

iTrader: (6)

it can be used in an EFI system.

one fast zo6

iTrader: (490)

your BBk ssi intake is an excellent intake and thats what i would use.

briancox

iTrader: (1)

when i bought the intake thats what i was told. i was thinking about switching over to carb but heard so many negatives about it but if i switch to the vic jr intake is it to much work to use it? is it worth the extra money doing it?!!!!!

Mike@HSW

iTrader: (6)

In my opinion the BBK is on par with the LS6 intake, it really doesnt compare to the FAST 92. All told the vic jr is around a 100-200 dollars cheaper then the fast, but in your case it will not perform as well.

jmill96Z

iTrader: (3)

I don't even think it's really on par with the LS6. At least the LS6 has the ability to disipate heat. The BBK is more of a car show piece IMO.

The FAST 90's are going pretty cheap these days since the 92 came out.

Cliff

iTrader: (19)

Stick with what you have if your spraying a 250. Why spend extra money on an intake with what your want to do.

briancox

iTrader: (1)

ill prolly just use mine till i get a good deal on fast or vic jr if you know where ones at let meknow