Who is running a 100+/- shot on a stock bottom end H/C motor
10-20-2003, 08:04 PM
#1
Launching!
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: USA
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
Who is running a 100+/- shot on a stock bottom end H/C motor How long have u been doing it, and what kit are u running...How long will it last, and any other suggestions that you have please...
Thanx
Thanx
10-20-2003, 10:39 PM
#2
Restricted User
iTrader: (9)
Join Date: Sep 2002
Location: Sierra Vista, AZ
Posts: 7,603
Likes: 0
Received 0 Likes
on
0 Posts
Re: Who is running a 100+/- shot on a stock bottom end H/C motor Sorry, not HC, but cammed yes, and I have been running 175 shot, 3 or 4 bottles, 150shot by lots of bottles. I use the NX wet kit, but am waiting for my NXL to be in 
On a 150shot, I normally get 9+/- full passes with no heater on a 10# bottle. 175 I have been getting 7 full passes. Get sticky tires, really sticky tires, and a walbro or similar fuel pump.
On a 150shot, I normally get 9+/- full passes with no heater on a 10# bottle. 175 I have been getting 7 full passes. Get sticky tires, really sticky tires, and a walbro or similar fuel pump. 
10-21-2003, 09:38 PM
#4
Re: Who is running a 100+/- shot on a stock bottom end H/C motor Allan, I ran my heads/cam TNT 100 shot for a while. Made 533/709. I still have the sheet. Went 10.82@132mph @ SDR with my stock 10bolt. You will be fine with a good tune. Mine blew up because dumb and dumber couldnt tune it properly for the juice. Get ya some TNT bro.