Meen95z

iTrader: (26)

Does anyone have a cam card for the ms4 cam? I bought a set of Texas Speed ls6 heads, stage 2.5 and they have prc valve springs on them, just want to make sure I have the right spring pressures for the ms4 came. Any info would help greatly.. Thanks

SS4Luck

iTrader: (10)

if they are the duals that are rated to .660" lift i dont see why they wouldnt be? i know there are alot of people running around with stg1 heads and an MS4

massconfusion

iTrader: (18)

here goes- adv dur int-289 exh-291 duration@.05 int 239 exh 242
max lift: int .651 exh .608 and whatever your lobe sep angle is. mine is 112

hope that helps

Meen95z

iTrader: (26)

yea, they are prc dual springs, rated to .700 lift I think. Just wanted to check the pressure to make sure its enough.

melroy293

iTrader: (5)

https://ls1tech.com/forums/generatio...cam-guide.html

slothy

iTrader: (2)