RENE'S RAGE

iTrader: (96)

Which rear drag springs do I need? Going to install my MWC FAB 9 in the coming weeks, so want to go ahead and change out the springs now and the shocks later. I'll be putting Strange Drag Shocks up front with 275lb springs also. I have the stock WS6 rear springs now. Just wandering what to do with the rear springs and shocks. Thanks in advance guys.

xpndbl3

iTrader: (23)

Most of the racers I see at the track still have stock rear springs, some remove the rubber isolator to lower it some, but that's about it.

RENE'S RAGE

iTrader: (96)

Yeah, that's what I was thinking also. Just wanting to see if anybody else had something different to add.

Ego Killer

iTrader: (147)

thats what I did

CodeRed2000SS

keep the stockers for now. i f u want a softer spring, find some for a v6. anything from 93-02

ssvert99

iTrader: (26)

Strange coil over conversion in the rear as well... choice of springs and ride height then!

Dragkid1917

iTrader: (2)

Keeping mine stock for now, if it dont work then prolly gunna go to the v6 springs.

WAHUSKER

iTrader: (4)

I found the Eibach Pros with HAL adj shocks worked well (consistent 1.4x 60' times). I'm now running the BMRs + HALs because they are 1/2 taller (EPP sells them) for more clearance (12" tires).