mormjatt

I have a 2000 z28 with a LS1. I want to know what are the best cylinder heads for these cars.

sroach20

iTrader: (31)

you want best budget heads, or money is no object heads.

djsanchez2

iTrader: (14)

Low budget = Stock 243 heads
No budget = TEA, AFR, etc. (depending on specific use)

redtail2426

iTrader: (10)

how much do you want to spend,prices range from 1000 to almost 3k for a set of nice heads.

sroach20

iTrader: (31)

you can go allot higher than $3k.

redtail2426

iTrader: (10)

True,i am just not sure about how much the best heads are.So that raises a ??.What is the most expensive cylinder head for the ls1.I am curious.I know there is a 4 valve head,but whats the most expensive 2 valve head.

1bdtrk

probably a dart worked over by a reputable builder such as bret bauer. Maybe not the MOST EXPENSIVE but pricey depending on your budget, but worth the money.

speaking of bret, anyone got his number? site is down and I need to chat with that guy.

SOMbitch

iTrader: (8)

PM sent, hope it helps.

eamador11

LMAO

This thread is similar to this:

https://ls1tech.com/forums/generatio...ket-heads.html

Noyzee

iTrader: (37)

my trickflows done by TEA where outstanding!!! my new ones will be there new 6 bolt heads. A++ for TEA

thebassbass

i am not sure but might be et canted heads there site said $7000

99blancoSS

iTrader: (115)

All Pro should be considered as well, IIRC they have a small bore coming out. talk to Richard at WCCH for info about it but you have a few options these days. AFR, TFS, PRC (new castings), ET, Dart (T4P), Edelbrock. That I can think of off the top of my head