Detoxx03

iTrader: (14)

Out of curiousity what can I realisticly expect to gain from an e-cutout on my car? I don't expect much but I got the cutout for free and figured, hell why not put it on. Its getting put on tuesday and we are gonna do a before and after dyno comparison. Thanks guys

itsjustaSB

iTrader: (13)

depends on your mods its hit and miss on some cars but i just dynoed with mods in sig on motor i only picked up 5 horses over my off road y pipe and 3 inch rumbler catback

Detoxx03

iTrader: (14)

Well i'm bolt on and cam/stall only

itsjustaSB

iTrader: (13)

it should pick up some in theory but if it dosent u still have it for the cool factor let us know how it does on tuesday

fxgs

iTrader: (2)

When I got my SS dyno tuned I picked up 4 rwhp and 14 rwt torque with the cutout open vs. closed

Detoxx03

iTrader: (14)

Yeah i'm not doing it for gains but rather for the noise and to scare people lol.

Loud02ss

iTrader: (3)

i just got my car tuned for my cam. they did a run with the cutout closed just to see how much it would make. all other runs were with it open and the difference was 1 horsepower and i forget, like 3tq. longtubes to ory to magnaflow. i guess a magnaflow is a pretty damn good flowing catback. if you have a stock catback i think it would definetly make a difference but with me it didnt.

WKMCD

iTrader: (2)

I picked up about 15 on both sides with the cutouts open on my C5 running a Z06 Ti catback.

linn.35

This is what my car did with the cut out opened and closed. I have the stock catback on the car.

heavy6.0

iTrader: (69)

We did some experimentation with a stock 2000 ws6 with long tubes, ORY, and a borla catback and it picked up 8hp with the QTP set in the half open position as compared to it being fully open.

Detoxx03

iTrader: (14)

So what about results with aftermarket cat-backs?

92SilverSHO

iTrader: (3)

I have headers/ORY with a dual/dual muffler welded in the stock catback. Cutout open netted me 10rwhp/10rwtq all across.

Detoxx03

iTrader: (14)

^ i'll be shocked if I get that much

mike c.

iTrader: (1)

On my 346ci head & cam,kook 1 3/4 header,off roads,b&b try flo catback I gained 10hp. on my 402ci Head & cam,same exhaust just 1 7/8 header I gained 19hp 11lbs tq..

waterbug1999

iTrader: (3)

That does seem right..... You picked up 52.3hp and 39tq??

HTX

iTrader: (1)

he probably has a cam and heads setup. I could see a 50hp difference happening if compared to stock exhaust.

Chris05ssTruck

iTrader: (9)

U will prolly see 5-10, most bolt on cars don't pick up a freak peak# gain but it should be all across the board.

1BADBLACKBIRD

iTrader: (2)

I have 02 T/A with 451/411. I have Kooks longtubes and Catted y-pipe. Cutouts after the cats. I have a Magnaflow catback and picked up 10HP/10TQ on the dyno with cutouts fully open accross the board.

ExceSSive

iTrader: (13)

I am ordering my cutout...as soon as I get my reply from Heavy 6.0. I will post my before and after dyno results.

waterbug1999

iTrader: (3)

I have dual cut outs, ill be on a dyno some time this summer so ill try and get an open/closed run.