Solid rollers on a hy-roller cam?
04-05-2009, 06:37 PM
#1
On The Tree
Thread Starter
Join Date: Feb 2009
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Solid rollers on a hy-roller cam? Anyone have experience doing this? Looking for the reliability of the solid roller but with the valvetrain-easy ramps of a hy-roller grind. That, and about 7600rpm, with stock crank, good rods and light pistons, cam in the .620's and 250's at .050.
04-05-2009, 09:33 PM
#3
On The Tree
Thread Starter
Join Date: Feb 2009
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Thanks. Was planning on using the tall style solid rollers with the link bars at the very top to clear the block. Reason being that I just wanted to do away with the lifter trays, worried about the hy-lifters falling out the bottom of the trays when using a reduced base circle cam.
04-06-2009, 05:29 AM
#4
Im running lifter trays with 7.450 pushrods and have no issues. The link bar lifters are really nice though. They are something like $600 i think. I dont think that lifters falling out of the trays are the issue at all thats not why the link bars are there. The risk is the lifter rotating in the lifter tray which would cause the roller wheel on the lifter to not roll anymore.