Torquer v2 idle tuning
#1
Torquer v2 idle tuning
I have a 02 T/A with mac mids, no cats, borla CB, ported MAF, Ported TB,lid, 4l80 and 3400 stall.
Just installed a Torquer V2 cam on a 113 230/232 .595 .598 i got it running and borrowed a bin from another car to get started. I just got it to idle ok and drive good with good AFR at cruise about 15.2 or so. When i go WOT it goes really rich, But what i am really need help on is tuning so it doesn't cut off when coming to a stop or changing gears.
I can't do a log while driving because my usb ports were broken off from my daughter trying to help. but here is the tune so far.
Just installed a Torquer V2 cam on a 113 230/232 .595 .598 i got it running and borrowed a bin from another car to get started. I just got it to idle ok and drive good with good AFR at cruise about 15.2 or so. When i go WOT it goes really rich, But what i am really need help on is tuning so it doesn't cut off when coming to a stop or changing gears.
I can't do a log while driving because my usb ports were broken off from my daughter trying to help. but here is the tune so far.
#7
That's fine i am able to adjust the VE now for the lean while at cruise speeds.
Got to take it for a drive to and from New Bern tonight about 55 miles round trip at about 65MPH. Drove great and when hitting lights it idled great but in stop and go it seems to surge a little?
Is there any tuning books i can brush up with?
Got to take it for a drive to and from New Bern tonight about 55 miles round trip at about 65MPH. Drove great and when hitting lights it idled great but in stop and go it seems to surge a little?
Is there any tuning books i can brush up with?