spare cam what would these specs be good for
04-23-2009, 05:53 PM
#1
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Nov 2007
Location: NJ
Posts: 1,193
Likes: 0
Received 0 Likes
on
0 Posts
spare cam what would these specs be good for Im selling some of my old parts to my friend who building a 427
What heads will this cam work with pretty good ?
any ideas where peak power might be guess?
Going to be installed just like this
think cam is intake 232 @ .50 Exhaust 242@ .50 lift about .630
was installed on cyl 1 Lobe seperation 115.1 =cam DEG
valve overlap =7.7 Crank DEG
intake Valve opens =1.1 BTDC
centerline=115.1 = ATDC
closes =51.3= ABDC
Exhaust
valve open=56.3 =BBDC
centerline=115.1=BTDC
valve close=6.6=ATDC
What heads will this cam work with pretty good ?
any ideas where peak power might be guess?
Going to be installed just like this
think cam is intake 232 @ .50 Exhaust 242@ .50 lift about .630
was installed on cyl 1 Lobe seperation 115.1 =cam DEG
valve overlap =7.7 Crank DEG
intake Valve opens =1.1 BTDC
centerline=115.1 = ATDC
closes =51.3= ABDC
Exhaust
valve open=56.3 =BBDC
centerline=115.1=BTDC
valve close=6.6=ATDC
