what size shims when porting/shiming a oil pump ?
#1
TECH Apprentice
Thread Starter
iTrader: (23)
Join Date: Mar 2007
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
what size shims when porting/shiming a oil pump ?
i have a new oil pump off a new 02 crate motor .. looking to port polish and shim it ..
anyone knw were i can get the shims ..
i would hope i can find a set a local hardware store ..
also how many and what size should i get .
ive already seen the requirements for certain ps1 ..
.121=79psi
.100=75.5
.095=74.6
im thinking the more psi the better right ?
current set up is h/c/i and 150shot on a plate system ..
ive already diasembled it , i knw were to portand not i just need the size of the shiims ..
ive searched now just looking for a 100% accurate answer ! thanks guys !
anyone knw were i can get the shims ..
i would hope i can find a set a local hardware store ..
also how many and what size should i get .
ive already seen the requirements for certain ps1 ..
.121=79psi
.100=75.5
.095=74.6
im thinking the more psi the better right ?
current set up is h/c/i and 150shot on a plate system ..
ive already diasembled it , i knw were to portand not i just need the size of the shiims ..
ive searched now just looking for a 100% accurate answer ! thanks guys !
#4
TECH Apprentice
Thread Starter
iTrader: (23)
Join Date: Mar 2007
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
i bought a few of the machine washers .. # 10 and # 8
now wich ones to use ive seen both us and how many ? just 2 ?
and were do i put the shims on the bottom of the spring top ? inside the lil piston looking thing ? anyone with picks would really be helpfull !!
now wich ones to use ive seen both us and how many ? just 2 ?
and were do i put the shims on the bottom of the spring top ? inside the lil piston looking thing ? anyone with picks would really be helpfull !!