Relocating Oil Filter Housing on an F-Body
04-24-2009, 04:22 PM
#1
On The Tree
Thread Starter
iTrader: (3)
Join Date: Jul 2008
Location: Bristol, TN
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Relocating Oil Filter Housing on an F-Body I have an '02 Camaro and I have an aftermarket oil pan (not sure what brand). When I installed my long tubes, the oil filter housing (which is also modified) would not fit. I have found a few universal relocation kits that look like they might fit. I was wondering if anyone else has ran into this problem and what you did to fix it. I'm definitely open for any and all suggestions!! Thank you in advance for your time/help!!
04-27-2009, 10:42 PM
#5
On The Tree
Thread Starter
iTrader: (3)
Join Date: Jul 2008
Location: Bristol, TN
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
This is the best I can do right now. In the first pic you can see how the housing mounted on the block before the header install. The other pic shows the pan a little better. It's a Moroso filter housing but I'm not real sure about the pan itself.