LS1x2

iTrader: (11)

I've made a th350 crossmember for these cars out of an a4 crossmember before without a problem. It was a while ago but I seem to remember checking to see how an m6 crossmember would work out for this and the trans would sit way to high. Has anyone fabbed one up using an m6 crossmember? How did you do it? Pics?

Thanks.

Pro Stock John

iTrader: (34)

I am using a M6 crossmember with my T400 and the trans actually sits a little low.

LS1x2

iTrader: (11)

Hmm. Any chance you could snap a pic sometime this week?

Pro Stock John

iTrader: (34)

Sorry not really, try Madman for advice on this stuff.

LS1x2

iTrader: (11)

Anybody else? I know I ran across a pic or 2 that members had a long time ago, but I cannot find them doing a search.

Reckless

iTrader: (9)

My MN6 member matched right up with the mount location on my TH400, but I used a 1/2" spacer to raise the tranny up with a urethane mount.