koolaid_kid

iTrader: (21)

I am moving my STS oil return line to the oil pan. I will shorten it and use an Earl's fitting to connect to my 1/4 NPT fitting in the pan. What size is the line, -6AN or -8AN?
I am looking in particular at -6AN part Earl's Performance 820106ERL or -8AN part Earl's Performance 820107ERL .
Thanks in advance.

mk1973

iTrader: (3)

As you know, the STS return oil line is 3/8". I am in the middle of a DIY rear mount and I am use -8 from the turbo to the pump and -6 from the pump to the pan..

99Ws6TransAm

iTrader: (43)

im looking to do the same. Anyone have any pics of this done?

koolaid_kid

iTrader: (21)

No, I did not know, hence the question. My fitting on the pan has a 1/4 NPT female connection. What fitting would I put on the 3/8" STS line?

geeteego

iTrader: (1)

I do, but it is on a GTO.

mk1973

iTrader: (3)

I would use this in the oil pan: Aeroquip FBM2004
I would then use this on your 3/8" sts oil line coming from the pump to the pan: Aeroquip FBM1532

mk1973

iTrader: (3)

I will have pics in about 2 weeks!!! I will be boosted!

koolaid_kid

iTrader: (21)

Thanks, mk1973, I'll look into it.
99WS6, I have an aftermarket pan on an LT1, so pics will probably not do you any good.