Machined LS1 block, 6.100 Rods, GM LS1 Crank, L92 heads, Corvette Stuff + A LOT More.
05-04-2009, 04:24 PM
#1
Machined LS1 block, 6.100 Rods, GM LS1 Crank, L92 heads, Corvette Stuff + A LOT More. Paypal verified over 4+ years. Cash works to. All paypal MUST include 3% increase. Call or e-mail. (916) 960-9094. z34_nut@hotmail.com (also my paypal address)
Items have been updated! Many parts have sold! Make offers on almost anything... Huge discounts will be given if you can pick them up before May 26th! (Leaving for New Hampshire)
I have a machined LS1 block at 3.908 finished honed with a torque plate. Mahle makes the pistons for that bore. Block has been cleaned, and bagged.
The oil seen in the cylinders is a teflon based lubricant to prevent rust in the bores while in storage.
$400.
Mahle 3.908 pistons.
http://cgi.ebay.com/ebaymotors/CHEVY...QQcmdZViewItem
C5 Corvette Rocker Savers. Brand new, never used, still package. Plastic type, cut outs for jacking pucks, etc. I payed $75 for these.
$55 FIRM.
F-Body stock air box system. And apperently a stock Corvette Air Box...
$35 for the f-body system, and $10 for the corvette box.
LS1/LS2 Dual Roller Timing set by SA Gear. High quality, comes with spacers. 100% billet machined. Retail is about $150 on this gearset.
I will take $100.
*New Items!*
Rybestos Front blanks for C5 Z06. Rotors, both sides, Brand new in box. Only one box is open for pictures.
$70.
Factory LS1 crank with 24tooth reluctor. Used, about 80k on it. Needs to be polished.
$100
Items have been updated! Many parts have sold! Make offers on almost anything... Huge discounts will be given if you can pick them up before May 26th! (Leaving for New Hampshire)
I have a machined LS1 block at 3.908 finished honed with a torque plate. Mahle makes the pistons for that bore. Block has been cleaned, and bagged.
The oil seen in the cylinders is a teflon based lubricant to prevent rust in the bores while in storage.
$400.
Mahle 3.908 pistons.
http://cgi.ebay.com/ebaymotors/CHEVY...QQcmdZViewItem
C5 Corvette Rocker Savers. Brand new, never used, still package. Plastic type, cut outs for jacking pucks, etc. I payed $75 for these.
$55 FIRM.
F-Body stock air box system. And apperently a stock Corvette Air Box...
$35 for the f-body system, and $10 for the corvette box.
LS1/LS2 Dual Roller Timing set by SA Gear. High quality, comes with spacers. 100% billet machined. Retail is about $150 on this gearset.
I will take $100.
*New Items!*
Rybestos Front blanks for C5 Z06. Rotors, both sides, Brand new in box. Only one box is open for pictures.
$70.
Factory LS1 crank with 24tooth reluctor. Used, about 80k on it. Needs to be polished.
$100
Last edited by z34_nut; 05-21-2009 at 01:03 PM.
