Any problem goin 42lb greentops cam only?
#1
11 Second Club
Thread Starter
iTrader: (14)
Join Date: Nov 2004
Location: Michigan (Macomb or Lansing)
Posts: 1,653
Likes: 0
Received 0 Likes
on
0 Posts
Any problem goin 42lb greentops cam only?
I have a racetronix fuel kit and torquer v3, ls6 intake, full boltons. I need new injectors. I figure the green tops will be good from a tuning stand point because i have all the necessary manufacturer information.
Will flowmatched greentop 42 lbers be fine for me? I think they flow 46 lbs @ 58 psi.
I realize they are too much for my current setup but I may build a bigger engine or do some other power adder eventually. It will also be nice having the ability to switch to a dry shot if i want.
Any problems with going to the 42 lbers. Will they waste fuel at idle? I noticed their minimum pulse width is smaller than stock so I think they might be able to get low enough to be useful.
Will flowmatched greentop 42 lbers be fine for me? I think they flow 46 lbs @ 58 psi.
I realize they are too much for my current setup but I may build a bigger engine or do some other power adder eventually. It will also be nice having the ability to switch to a dry shot if i want.
Any problems with going to the 42 lbers. Will they waste fuel at idle? I noticed their minimum pulse width is smaller than stock so I think they might be able to get low enough to be useful.