Need Wet/Dry link
#1
TECH Apprentice
Thread Starter
Join Date: Oct 2006
Location: Wichita, Ks.
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
Need Wet/Dry link
Can someone throw up the link to the best Wet vs. Dry thread. I know I've seen this in the past, it had a lot of posts with great arguments and good discussions.
I did a search back to 05 and couldn't seem to locate it. Thanks
I did a search back to 05 and couldn't seem to locate it. Thanks
#2
TECH Apprentice
Thread Starter
Join Date: Oct 2006
Location: Wichita, Ks.
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
#4
TECH Apprentice
Thread Starter
Join Date: Oct 2006
Location: Wichita, Ks.
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
Thank you.
Let me ask you your opinion, have a modified LS7 11.25 :1 CR, 44.5 # Bosch injectors, looking for a safe 75-100 shot kit. What would you recommend?
Let me ask you your opinion, have a modified LS7 11.25 :1 CR, 44.5 # Bosch injectors, looking for a safe 75-100 shot kit. What would you recommend?
#5
FormerVendor
iTrader: (25)
I am all about keeping it simple. For an application like yours I would go with our wet plate system. The good thing is you can grow with it. We have people using our plates for up to 300 hp. I normally like to suggest going direct port for anything over 250hp.
Make sure you add the windowswitch and needed accessories to get the full potential out of the system safely.
If I can be of any assistance in answering any questions let me know. I will be glad to help.
Dave
Make sure you add the windowswitch and needed accessories to get the full potential out of the system safely.
If I can be of any assistance in answering any questions let me know. I will be glad to help.
Dave