Smoke Em

i was wondering what is the max size rims and tires that will fit in back of a lt1 camaro with out having to use a hammer and with out any issues.

pics would be helpful

SmokedOutZ28

iTrader: (35)

The 17x11 wheels will fit in the back without hammering.

Smoke Em

how much do they stick out with a stock rear end

SmokedOutZ28

iTrader: (35)

They don't, they sit even with the fender

Smoke Em

what size rims and tires are you running
that looks sick
do you have a shortened rear end or is it stock
because i saw pics of 315 with an lt1 and they are sticking out quite a bit
what is your offset on those rims

SmokedOutZ28

iTrader: (35)

Those were 17x11 that were widen 1'' by a wheel company to make 17x12. Tire size was 315 switched to a 335. Normal tt2 offset is 7.75

Here is the best shot I have of the back with a normal tt2


My new wheels are 17x12 with less backspacing to go with a narrowed rear end and they sit about 1/4'' outside the fender according to my measurements.

Smoke Em

ok because i saw some pics of your rims on fquick and they looked like they stuck over half an inch outside the fender but i didnt know they were 335's
thats a nice looking z
what did it run

SmokedOutZ28

iTrader: (35)

Oh well thats because that was the stock length rear-end with the set of tt2's that were made for a narrowed rear.. They stuck out huge, once I put the S60 in it was all better.




Not sure on the time, Still breaking in the S60 will hit the track by july though.

Toronto LT1

iTrader: (2)

holy **** ^^

nice car btw.

Smoke Em

ok just to make sure those last pics were 335 tires with a stock rear end
and 315's fit fine without sticking outside the fender