1slow98Z28

iTrader: (3)

Well i got a set of greg welds for the front of my cars 15 by 3.5. Tried to put them on today and they are hitting my calipers bad. Has anyone had this happen to them?

01z

iTrader: (3)

are you using spacers?? i dont know the offset but on my 3.5s i have a spacer, i will measure it tomorrow if you want

1slow98Z28

iTrader: (3)

yeah it seem like it need a 3/8 spacers.... but wasnt sure if other people have them or not

Camaro396

iTrader: (14)

What brakes are you running? You're the only person who has ever had a Greg Weld front wheel NOT clear stock F-body brakes.

1slow98Z28

iTrader: (3)

stock 98 calipers with drilled and slotted brakes

Ericbigmac83

iTrader: (19)

Mine fit fine

STEEPSS

iTrader: (30)

i've Never heard of anyone having problems with the GW wheels.

where are they hitting @?

nitrobusa

iTrader: (17)

Mine fit fine also. I had a set of polished ones that fit and now a set of chrome ones and they all fit with no grinding.

Where did you get them from?

1slow98Z28

iTrader: (3)

mccormick racing here in michigan

part number: Greg Weld #92-535340C Wheel, Dragstar, Aluminum, Chrome Plated, 15 in. x 3.5 in., 5 x 4.5/5 x 4.75 in. Bolt Circle, 1.750 in. Backspace.

litemup02

iTrader: (39)

Yeah thats strange they dont fit.. mine were also listed as 1.75 BS but it says 1.63 on the box... And i'm guessing the C on the end of the part number is for chrome? Mine is a P and they are polished. Looks to be the same wheels as everyone else has

TheSilverOne

iTrader: (22)

mine fit fine also

1slow98Z28

iTrader: (3)

yeah nothing it going good right now with my car blew 3 +4th out of the trans and had heads put on and they stripped the rockers out of the new heads by over torqing them doem.....