camarorat

iTrader: (8)

I am running a stock aluminum driveshaft and 10 bolt in my 02 camaro right now and I want to get a stronger driveshaft. The problem is that I am planning on getting a 12 bolt set up with 1350 u joints in the future, and I don't want to have to buy another new driveshaft when I go to the 12 bolt; since the stock rear and shaft use 1310 U joints. Does anyone make a rear yoke for the stock rear that will accept the 1350 u joints? I'd rather just change the yoke on the rear now.

chucks ss

iTrader: (8)

not so much the same , i have a moser 9 inch and im using a 1350 u joint on my stock drinve shaft but i dont know if you can get a yoke for that rear or not but i know the stock shaft will accept it