***BAD ASS WS6*** Low Milage...Performance Parts...
#1
Launching!
Thread Starter
iTrader: (11)
Join Date: Nov 2006
Location: ORANGE COUNTY, CA
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
***BAD *** WS6*** Low Milage...Performance Parts...
Up for sale is my 1999 Pontiac Trans Am WS6 Convertible. It is in GREAT condition!!! It was built to be a road race/ autocross car that could also hit the drag strip whenever we wanted. The car put down 513rwhp and 430wtq on the motor....and 730rwp and 700rwtq on the spray... about 2 months after all of this was complete, the car was vandalized and LOTS of parts were stolen off the car!!! i mean from the Direct port intake, to the gauges, radio, etc... so i then decided i am just going to put it back to stock and sell her.
I have sold many performance parts off the car and put stock parts back on it,but there are still some aftermarket parts that i had extras of that i am going to leave on the car...
The car now has:
-Car has only about 40K miles on the entire car
-2002 LS1 rebuilt with ONLY 2,500miles on it
-T-56 6-speed rebuilt with a few little upgrades, B&M shifter and only 3,600miles on it with Z06 clutch
-Full 6-point Chromoly Black Powder coated Roll Cage with Simpson 5-Point Harness
-VFN fiberglass fully functional Ram Air Cowl hood
-Stock built rear with 4.10 gears, Eaton posi, and upgraded axles
-Full Air Conditioner is now back in the car
-I have racing seats for now but the stock leather seats might go back in the car
-JBA Competition Shorty Headers
-SLP Y-Pipe with Custom Race Muffler
-There are ADDCO Front and Rear Sway Bars on it
-Global West Subframe Connectors
-BMR Adjustable Panhard Rod
-BMR Lower Control Arms
-BMR Strut Tower Brace
-Sportline Springs
-Crossdriled and Slotted Rotors, -Hawk Pads, -Steel Braided Brake lines
-Walbro 255 fuel pump
-SLP Air Lid
-Aluminum Drive Shaft
-Black Z06 wheels with chrome lip... 17"fronts, 18" rears
-I also have EVERY record and receipt that ever went to the car along with EVERY stock part that ever came with the car!
-The car has a few little scratches, scrapes and dings, but nothing really noticeable bad that isnt easily fixed... i am picky so i notice them...
I also have a a couple built motors,nitrous system, turbo system, and tons of performance parts that could go on this car...
I am asking $13,000 OBO how it is or negotiable for other parts added... feel free to call me at anytime if you have a question.... I WILL CONSIDER REASONABLE OFFERS!
(714)271-7570
Keith
Here is a video of what the car did sound and look like......
The car still looks the same.....But some of you might not like those graphics and stripes and think they look NASTY... well fine!!!! they can come off so dont worry!!!
Here is a recent picture and walk around of the car....
I have sold many performance parts off the car and put stock parts back on it,but there are still some aftermarket parts that i had extras of that i am going to leave on the car...
The car now has:
-Car has only about 40K miles on the entire car
-2002 LS1 rebuilt with ONLY 2,500miles on it
-T-56 6-speed rebuilt with a few little upgrades, B&M shifter and only 3,600miles on it with Z06 clutch
-Full 6-point Chromoly Black Powder coated Roll Cage with Simpson 5-Point Harness
-VFN fiberglass fully functional Ram Air Cowl hood
-Stock built rear with 4.10 gears, Eaton posi, and upgraded axles
-Full Air Conditioner is now back in the car
-I have racing seats for now but the stock leather seats might go back in the car
-JBA Competition Shorty Headers
-SLP Y-Pipe with Custom Race Muffler
-There are ADDCO Front and Rear Sway Bars on it
-Global West Subframe Connectors
-BMR Adjustable Panhard Rod
-BMR Lower Control Arms
-BMR Strut Tower Brace
-Sportline Springs
-Crossdriled and Slotted Rotors, -Hawk Pads, -Steel Braided Brake lines
-Walbro 255 fuel pump
-SLP Air Lid
-Aluminum Drive Shaft
-Black Z06 wheels with chrome lip... 17"fronts, 18" rears
-I also have EVERY record and receipt that ever went to the car along with EVERY stock part that ever came with the car!
-The car has a few little scratches, scrapes and dings, but nothing really noticeable bad that isnt easily fixed... i am picky so i notice them...
I also have a a couple built motors,nitrous system, turbo system, and tons of performance parts that could go on this car...
I am asking $13,000 OBO how it is or negotiable for other parts added... feel free to call me at anytime if you have a question.... I WILL CONSIDER REASONABLE OFFERS!
(714)271-7570
Keith
Here is a video of what the car did sound and look like......
The car still looks the same.....But some of you might not like those graphics and stripes and think they look NASTY... well fine!!!! they can come off so dont worry!!!
Here is a recent picture and walk around of the car....
#6
#7
WOW bro how did you get that thing running...last i saw it was at your boys shop...OCGMP... it was missing as whole bunch of parts....similar to the ones im missing now...
Trending Topics
#8
Launching!
Thread Starter
iTrader: (11)
Join Date: Nov 2006
Location: ORANGE COUNTY, CA
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
I had to bust my *** to get it all done!!!! AND DONT mistake me working on my car at that shop as Danny being my boy or even that those parts might be yours... not even close is he my boy... i had to get so many new parts just to get my car running....
#11
HUH? I didnt really think you had my parts.... no need to get defensive... Im just surprised that you got that thing running so fast... Mine is still over at CMS.
#12
Launching!
Thread Starter
iTrader: (11)
Join Date: Nov 2006
Location: ORANGE COUNTY, CA
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
The reason I got my car done so fast is because I have a shop & busted my *** to get it done..... I was just doin a fellow shop a favor & giving them some business since I was swamped! Especially since I knew Danny, but then he decided to completely change & be the piece of **** he is bein now! He was always a cool guy!
Well let me know wut happens, if u need anything u know how to reach me! Your car is in good hands at CMS, I havnt had the opportunity to work with them, but I have seen some good work!
P.S.---- let people know I got a nice T/A for sale! Thanx!