550 rwhp and +/- 10psi. What head fasteners
#1
550 rwhp and +/- 10psi. What head fasteners
I gonna start tearing my car down here in the next couple weeks and need to buy head fasteners to put it back together.
I will be running stock 317 heads with GM MLS gaskets. Goal is 550-575 rwhp and roughly 10-11 psi.
I know ARP studs are ideal but the big goal here is budget. If i can get away with ARP bolts or even stock GM bolts it would be fantastic, but if not i dont mind spending money on things that are required.
What do you think
I will be running stock 317 heads with GM MLS gaskets. Goal is 550-575 rwhp and roughly 10-11 psi.
I know ARP studs are ideal but the big goal here is budget. If i can get away with ARP bolts or even stock GM bolts it would be fantastic, but if not i dont mind spending money on things that are required.
What do you think
#2
TECH Addict
iTrader: (8)
Join Date: Oct 2008
Location: toronto ontario canada
Posts: 2,047
Likes: 0
Received 2 Likes
on
2 Posts
i consider arp studs being required on any FI motor with 4 bolt heads. but that is just my personal opinion. there are plenty of people running factory head bolts on 8-10 psi