landonew

Anyone have any pictures of how much frame they removed with the frame horns? I don't want to have to weld in the radiator support.

Also, Does an angle grinder get the job done?

Thanks

DMH Fabrication

iTrader: (126)

Mine are cut right behind the bumper support brackets and they weighed about 5# for the pair. Angle grinder works. I used a sawzall and then cleaned the frame up with a grinder and welded a thin plate back to the frame to cap it.

Taubr Unit

iTrader: (32)

i also used a sawzall and cleaned it up with a angle grinder. Click the link in my sig for pics

BlackWS666

iTrader: (31)

I cut as much off as possible. Cant remember the exact weight. But was more than i thought it would be. Hope it helps you out.

BigKap94z

iTrader: (47)

I just finally did this mod this weekend, i cut back far enough to get the horns, but not so far i needed any core support welding or mods. The horns themselfs weight about 7.5lbs for the pair.

3rdgen92maro

iTrader: (20)

I just used a 4" grinder with a cut off wheel to do the job. Heres a few pics of how i did mine.

studderin

iTrader: (28)

I have mine, But I saw I think it was SUX2BU lopped off the front. The looks light on the top cut a angle them back about another 4-5inchs. The down the outside of the back. Might need a plasma cutter or some cmall cutoff wheels. it it was a bunch more metal.

Duffster

iTrader: (103)

More pics