What are the limits of a .78 orfice Nitrous solinoid? Same for the small fuel noid?
05-27-2009, 11:46 PM
#1
TECH Fanatic
Thread Starter
iTrader: (35)
Join Date: Aug 2004
Location: Paramount CA
Posts: 1,016
Likes: 0
Received 0 Likes
on
0 Posts
What are the limits of a .78 orfice Nitrous solinoid? Same for the small fuel noid? I have a junk *** nitrous works basic wet kit with a single NX shark nozzle. Ive been contemplating trying out a .70Nitrous jet and a .38 fuel jet. I run c16 at 555psi in the standalone when hitting the spray and I have a racetronix in the maintank.
My question is when do these tiny .78 orfice noids become a restriction?
I only saw a 128RWHP and 140rwtq increase through a 3600Vig locked up with a .62 Nitrous jet and .32 fuel jet granted the bottle pressure was only 900psi. What would it make at 1000psi or 1050psi?
Am I already maxing out these solinoids?
I believe Dynotune rates them to 175HP, but I'm assuming that has to be flywheel HP
would I be nuts expecting 165RWHP out of these noids with a .70 jet?
My question is when do these tiny .78 orfice noids become a restriction?
I only saw a 128RWHP and 140rwtq increase through a 3600Vig locked up with a .62 Nitrous jet and .32 fuel jet granted the bottle pressure was only 900psi. What would it make at 1000psi or 1050psi?
Am I already maxing out these solinoids?
I believe Dynotune rates them to 175HP, but I'm assuming that has to be flywheel HP
would I be nuts expecting 165RWHP out of these noids with a .70 jet?
