A3 racers what transmission safety items you have?
#2
I ruin the end of films...
iTrader: (2)
Join Date: Nov 2002
Location: Taking back some video tapes
Posts: 1,545
Likes: 0
Received 0 Likes
on
0 Posts
I'm running a TH400 with a JW UltraBell and CSI SuperShield.
If anything gets through all of that, I figure I didn't have much of a chance to begin with.
If anything gets through all of that, I figure I didn't have much of a chance to begin with.
#3
TECH Fanatic
iTrader: (1)
Join Date: May 2002
Location: Hot Rainy Humid +2000 DA South Florida
Posts: 1,396
Likes: 0
Received 1 Like
on
1 Post
I got the same exact setup as mongse, my TH400 was built by JW with the JW Ultrabell installed, and I'm running a supershield.
I always joke with the tech guy at the track, when he asked if I have a tranny shield i say "Yes the sheet metal floor board right there." Sometimes they have a sense of humor, sometimes they don't.
Lee
I always joke with the tech guy at the track, when he asked if I have a tranny shield i say "Yes the sheet metal floor board right there." Sometimes they have a sense of humor, sometimes they don't.
Lee
#5
I ruin the end of films...
iTrader: (2)
Join Date: Nov 2002
Location: Taking back some video tapes
Posts: 1,545
Likes: 0
Received 0 Likes
on
0 Posts
It fit fine on mine. The biggest pain was getting the bolts through all the holes(CSI shield, metal retainer ring, thicker UltraBell case) into the back of the motor. I pretty much decided that when I have to change the transmission, the whole thing get dropped.