Where do you get head gaskets for strokers?
11-09-2003, 05:40 PM
#5
TECH Fanatic
iTrader: (1)
Join Date: Nov 2002
Location: Venice, Ca
Posts: 1,829
Likes: 0
Received 0 Likes
on
0 Posts
My cometic's were 180, and I had them custom made through them directly. The fel pro's are like 24 a piece but only come in .052 thickness. Gotta use cometic if you want a different gasket thickness.
11-09-2003, 08:09 PM
#7
TECH Fanatic
iTrader: (1)
Join Date: Nov 2002
Location: Venice, Ca
Posts: 1,829
Likes: 0
Received 0 Likes
on
0 Posts
How thick are the regular run of mill cometics?
There is no regular thickness. I have seen them in .041, .043, .047, .051, but you have to figure out what thickness you need for p to v clearance, and static compression. Ross pistons has a really cool calculator on their web page.
There is no regular thickness. I have seen them in .041, .043, .047, .051, but you have to figure out what thickness you need for p to v clearance, and static compression. Ross pistons has a really cool calculator on their web page.