Spray and an MS3
Trending Topics
#14
im putting my motor together as we speak.
its gonna be a full weight trans am.
complete street car.
lq9 bottom end with 241 which should make my motor higher compression than stock but also a 6liter.
so my guess is like 10.8:1 compression 364ci. i have a ms3 cam with ls7 lifters and plan on spraying a 200 on that sumabitch.
if it blows it blows.
im running a th400 with a 3500 stall and full drag suspension with slicks and skinnies.
i hope i can hit a bottom 11 all motor and maybe a low 10 on the juice
its gonna be a full weight trans am.
complete street car.
lq9 bottom end with 241 which should make my motor higher compression than stock but also a 6liter.
so my guess is like 10.8:1 compression 364ci. i have a ms3 cam with ls7 lifters and plan on spraying a 200 on that sumabitch.
if it blows it blows.
im running a th400 with a 3500 stall and full drag suspension with slicks and skinnies.
i hope i can hit a bottom 11 all motor and maybe a low 10 on the juice
Last edited by pozesd99'; 06-07-2009 at 06:07 PM.
#18
10 Second Club
iTrader: (16)
Join Date: Oct 2005
Location: Fort Lauderdale ,FL
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
The MS3 loves juice!!!! My race wieght is around 4000lbs running 10.60 @127 with a 315/35/17. That was spraying a 100 shot out the hole and a second 100 midtrack. I'll be ordering some 28" tires in the next week and see how much better I can do with a 150 out of the hole
#19
TECH Fanatic
Thread Starter
iTrader: (17)
Join Date: May 2006
Location: Chicago IL
Posts: 1,172
Likes: 0
Received 0 Likes
on
0 Posts
The MS3 loves juice!!!! My race wieght is around 4000lbs running 10.60 @127 with a 315/35/17. That was spraying a 100 shot out the hole and a second 100 midtrack. I'll be ordering some 28" tires in the next week and see how much better I can do with a 150 out of the hole