Strange Rear – What size U-Joint??
11-08-2003, 08:37 PM
#1
11 Second Club
Thread Starter
Join Date: Dec 2002
Location: Millersville, Maryland
Posts: 169
Likes: 0
Received 4 Likes
on
3 Posts
Strange Rear – What size U-Joint?? Does anyone know the correct U-Joint size for a Strange 12-bolt for a 1999 Z28 (A4) with the OEM aluminum drive shaft?
Strange shipped me a Precision #447. However, according to a write-up that someone suggested on this forum a while back (http://members.aol.com/InjuneerZZ/Strange12.htm), the author states that the aluminum drive shaft uses a Precision #348 and that the #447 if for a steel drive shaft. Since the vendor I bought it from never asked about my drive shaft at the time I ordered, I tend think I got the right one. If someone knows the definitive answer, though, I would be appreciative. Thanks.
Strange shipped me a Precision #447. However, according to a write-up that someone suggested on this forum a while back (http://members.aol.com/InjuneerZZ/Strange12.htm), the author states that the aluminum drive shaft uses a Precision #348 and that the #447 if for a steel drive shaft. Since the vendor I bought it from never asked about my drive shaft at the time I ordered, I tend think I got the right one. If someone knows the definitive answer, though, I would be appreciative. Thanks.
11-10-2003, 01:30 PM
#2
TECH Junkie
iTrader: (9)
Join Date: Dec 2001
Location: WA
Posts: 3,326
Likes: 0
Received 0 Likes
on
0 Posts
While I was waiting for my Denny's shaft, I used the #447 u-joint that came with my Strange for about a month with my OEM aluminum driveshaft (2000 SS M6) and it fit and worked just fine.
