dicky98z

iTrader: (2)

im looking for a ls1 shortblock in good shape, let me know what you have.

thanks
dicky

smok'nZ

iTrader: (160)

i have a complete intake to oil pan 76k i might part out the shortblock pm me an offer keep in mind shipping will be 100-200$

kenp

iTrader: (9)

I have a low miler that the rings gave out on after a head/compression upgrade that I'm getting ready to turn in as a core next week in LA.

UVETTYA

iTrader: (-1)

I have an Ls6 short block that I took out of my '04 Z06. It dropped a lifter on #1 and has very minor scoring on that lifter port, at the very bottom 1/16" of the port and on one side of the port.

You can see what appears to be scoring by shining a flashlight down in the port and what you see is what I described... the very bottom 1/16" of the port, and only on one side, isn't as shiny as the rest of the port. So I'm assuming there is a little scoring from the broken lifter but I can't feel anything out of the ordinary with my finger. It's nice and smooth, no burrs. Fortunately the engine was at idle when the lifter came apart and I shut it off right away.

A lifter slides up and down in the port very nicely and there is no binding, but I don't know for sure the extent of the damage beyond what is visible, but it appears to be minor. Again, it's just the bottom 1/16" of the port and the scoring is only half way around the port. I'll try and get a picture if you're interested.

Other than that, it ran very well until the lifter came apart, and as far as I know there are no other issues with the block, crank, or pistons. $1200 plus shipping.

Andrews_Motorsports

iTrader: (113)

I've got the shortblock from a 2001 Trans Am with 54k miles for $1200 shipped anywhere in the US.

Formulized94

iTrader: (68)

damn, i bet you do...

dicky98z

iTrader: (2)

thanks guys but i decided to just part the whole car out.

thanks for looking
dicky